CellaCast PA 81 Pyrometer ( cảm biến nhiệt hồng ngoại) Keller MSR- Keller MSR VN

Mr.Hòa
[Senior Sales Eng. ]

[Cellphone]: 0973.940.975

                01273.991.622

[Email]: hoa@songthanhcong.com

[Yahoo]: Sagittarius_1610

[Skype]: hoadinh_stc

THƯ NGỎ - STC VIỆT NAM

Công ty  TNHH TM DV Song Thành Công (STC) chúng tôi luôn tự hào là một trong những nhà cung cấp vật tư và thiết bị hàng đầu chuyên dùng cho ngành công nghiệp trong các dây chuyền sản xuất và trong các hệ thống điều khiển toàn bộ hệ thống hoạt động của nhà máy, xí nghiệp hay các sản phẩm của công nghệ cao và chất lượng.

Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Cảm biến, Encoder, Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…

• Range of models

Type	Measuring range	Lens	Focus range	Distance ratio
AF 11	800 - 2400 °C	PA 41.01	0,2 m - ∞	190 : 1

Features:

• Temperature range 800 - 2400 °C
• Maintenance-free, wear-free system for temperature measurement at the melting furnace, holding furnace, cupola furnace and blast furnace
• ATD function filters out temperatures detected from surfaces free of slag and oxide
• Dual-wavelength technique provides reliable temperature data despite dust and steam
• High-resolution optics enable viewing at greater distances
• Sensor head and fibre optic cable for ambient temperatures up to 250 °C

Technical data:

Measuring range	800 - 2400 °C
Sensor	Si/Si photo diode
Spectral sensitivity	0.95/1.05 μm
Focussing range	0.2 m - ∞
Fibre optic waveguide	quartz fibre, can be screwed off at both sides, length and design are variable
Distance to target-size ratio	190 : 1 at 400 mm
Digital output	periodic output of measurement data with adjustable cycle time
Analogue output	0(4) - 20 mA linear, switchable, scalable (4 - 20 mA is standard)
Resistance	max. 500 Ω
Response time t98	≤ 20 ms (T ≥ 950 °C)
Resolution analogue output	0.2 K + 0.03 % of the adjusted span
Resolution display	1 K
Resolution USB / RS 485	0.1 K in terminal mode
Measurement uncertainty	1.5 % (at ε = 1.0 and Ta = 23 °C)
Linearisation	digital via microcontroller
Repeatability	3 K
Sighting device	Laser target marker
Ambient operating temperature	electronics: 0 - 65 °C sensor: -20 - 250 °C fibre optic cable: -20 - 85 °C optional up to 250 °C
Indication of overheating	If the internal temperature of the pyrometer exceeds 80 °C the analogue output will show a value > 20.5 mA
Storage temperature	electronics: -20 - 80 °C sensor: -20 - 250 °C fibre optic cable: -20 - 85 °C optional up to 250 °C
Temperature coefficient	0.05 %/K of temperature reading
Data communication	USB / RS 485 Integrated menu-driven user interface to set parameters and transmit data to a PC
Analogue input	0 - 10 V
Switching output	2 Open collector outputs 24 V, ≤ 30 mA
Digital input	2 to 24 V
Power supply requirement	24 V DC + 10 % / -20 % / current input ≤ 135 mA (150 mA with laser) Ripple: ≤ 200 mV
Dimensions	Ø 65 x 220 mm (when connector is attached)
Housing material	Stainless steel
Mounting	External thread M 65 x 2, length 40 mm
Weight	approx. 0.9 kg
Connection	with 8-pin connector
Protection	IP 65 according to DIN 40050 (when connector is attached)

Adjustable parameters:

Analogue output 1 + 2 source / scaling

Digital input output 1 + 2source / switch point

Transmission factor

Compensation of the reflected ambient radiation

Look-up table for temperature alignment

Ratio correctionε1 and ε2: 80 to 120 %; increament size 0.1 %

Emissivity ελ1 and λ2: 10.0 to 110 %; increament size 0.1 %

Smoothing function t980 - 16 sec.

Memory modes- Min./Max. (peak picker) - Double maximum with adjustable hold time

Optional accessories:

Calibration certificate according to ISO 9001

Large variety of mounting devices, digital displays, software etc.