CellaTemp PA 13 Pyrometer (cảm biến nhiệt hông ngoại) Keller MSR- Keller MSR VN

Mr.Hòa
[Senior Sales Eng. ]

[Cellphone]: 0973.940.975

                01273.991.622

[Email]: hoa@songthanhcong.com

[Yahoo]: Sagittarius_1610

[Skype]: hoadinh_stc

THƯ NGỎ - STC VIỆT NAM

Công ty  TNHH TM DV Song Thành Công (STC) chúng tôi luôn tự hào là một trong những nhà cung cấp vật tư và thiết bị hàng đầu chuyên dùng cho ngành công nghiệp trong các dây chuyền sản xuất và trong các hệ thống điều khiển toàn bộ hệ thống hoạt động của nhà máy, xí nghiệp hay các sản phẩm của công nghệ cao và chất lượng.

Chúng tôi là công ty hàng đầu chuyên về Xuất Nhập Khẩu các thiết bị như: Cảm biến, Encoder, Relays, PLC, HMI, Inverter,Thiết bị đo nhiệt độ, áp suất, lưu lương, đo mức, motor, Pump…

STATIONARY PYROMETERS

Pyrometer CellaTemp^® PA 13CellaTemp^® PA 13 is specially designed to detect the temperature of objects in flame-heated furnaces. Because PA 13 works at a narrow spectral range of 3.9 µm, water vapour and CO2 in the detector’s field of view will not influence the measurement, even at greater target distances. The spectral sensitivity of this model enables highly accurate and reliable measurements through flames and combustion gases.

Features:

• Range: 500 to 1600 °C
• Digital input / output
• Focusable optics allow for precise distance adjustment 
• Precision lenses with broadband antireflection coating
• LED display is easy to read from a distance
• Test current can be applied to perform diagnostics
• Signal processing: two analogue outputs and USB / RS485 interface

• Range of models

Target sighting			Measuring range	Lens	Focus range	Distance ratio
Through-the-lens	Laser spot light	Video camera
AF 1	AF 1/L	AF 1/C	500 -1600 °C	PZ 15.03	0,6 m - ∞	45 : 1

Technical data:

Measuring range (adjustable in partial ranges)	500 - 1600 °C
Sensor	Thermopile
Spectral sensitivity	3.9 μm
Focussing range	0.8 m - ∞ (standard lens)
Distance to target-size ratio	45 : 1 at 600 mm (standard lens)
Digital output	periodic output of measurement data with adjustable cycle time
Analogue output 1 & 2	0(4) - 20 mA linear, switchable, scalable (4 - 20 mA is standard)
Resistance	max. 500 Ω
Response time t98	≤ 100 ms
Resolution analogue output	0.2 K + 0.03 % of the adjusted span
Resolution display	1 K
Resolution USB / RS 485	0.1 K in terminal mode
Measurement uncertainty	1 % of reading (at ε =1.0 and Ta = 23 °C)
Linearisation	digital via microcontroller
Repeatability	2 K
Sighting device	through-the-lens sighting with target marking, laser spot light or camera
Ambient operating temperature	0 - 65 °C
Indication of overheating	If the internal temperature of the pyrometer exceeds 80 °C the analogue output will show a value > 20.5 mA
Storage temperature	-20 - 80 °C
Temperature coefficient	≤ 0.04 %/K of temperature reading
Data communication	USB / RS 485 Integrated menu-driven user interface to set parameters and transmit data to a PC
Analogue input	0 - 10 V
Switching output	2 Open collector outputs 24 V, ≤ 30 mA
Digital input	2 to 24 V
Power requirement	24 V DC + 10 % / -20 % / current input ≤ 135 mA (150 mA with laser) Ripple: ≤ 200 mV
Dimensions	Ø 65 x 220 mm
Housing material	Stainless steel
Mounting	External thread M 65 x 2, length 40 mm
Weight	ca. 0.9 kg
Connection	with 8-pin connector
Protection	IP 65 according to DIN 40050 (when connector is attached)

Adjustable parameters:

Analogue output 1 + 2 source / scaling

Digital input output 1 + 2source / switch point

Transmission factor

Compensation of the reflected ambient radiation

Look-up table for temperature alignment

Emissivity ε10.0 to 99 %; increament size 1 %

Smoothing function t980 - 16 sec.

Memory modes- Min./Max. (peak picker) - Double maximum with adjustable hold time

Optional accessories:

Calibration certificate according to ISO 9001

Large variety of mounting devices, digital displays, software etc.